Control the Objects of Switch Type
Controlling objects of Switch type
Clicking a graphic object with an object of Switch type connected to control (the user has insufficient access rights) opens the control window that contains of at most 5 tabs (displaying of the tabs described below depends on the object configuration and the HI settings - the parameter Simple window for Switches):
The tab allows to acknowledge current value and control current process alarm of the object.
1 | Object name. |
2 | Object description. |
3 | Current value [states] and technical units of the object. |
4 | Value time. |
5 | Acknowledges the object value. |
6 | Part of the tab used to control current process alarm. |
The tab is used to command the switch.
1 | Switch commands. |
2 | Sets given command. |
The tab allows to set and use a default value.
1, 2 | Default value of the object. |
3 | Sets the default value. |
4 | Cancels the use of default value. |
The tab allows to set a blockade of the switch. The blockade A can be controlled by operator, the blockade B cannot be controlled at all.
1 | Status of blockade A. |
2 | Status of blockade B. |
3, 4 | Enables / disables blockade A. |
5 | Confirms the setting of blockade A performed by clicking 3 or 4. |